3 The Easiest Ways to Fix Iron That Is Not Hot

How to fix an iron that is not hot is actually relatively easy and does not require special expertise. Users of irons in the type of electric iron or steam iron are generally housewives and young women, therefore when the iron is not hot the first thing they do is bring the iron unit to the repairman. In fact, if they know what causes the iron not to heat then even those who are very ordinary with electronic problems can also fix it themselves.

Tools Required for Ironing Repair

To repair an iron that is not hot, before starting it is better to prepare the tools that are needed in advance

• Screwdriver with tip - and +
• AVO Meter
• Cable cutting tools (cutter or scissors)
• Isolation

Causes of Iron Not Heat and Solution

After preparing the tools that are needed, it's time to find out why the iron isn't hot. The following points are some of the main causes of irons that do not want the heat most often encountered.

Problems occur with Iron Electric Current Connections

This is usually indicated by not turning on the indicator light on the iron. To make sure you can use the AVO meter tool to check the condition of the iron cable. If there is no reaction, there is a problem with the iron cable, but if there is a reaction on the AVO meter, then most likely the problem is the stop contact of the current connector.

Solution to Problems in Electric Current Connections:

If the problem is to stop contacting the electricity supply provider, you should contact an electrician or someone who is an expert in electricity. But if there is a problem with the iron cable, you can try to repair it yourself. The trick is to find a cable problem that breaks and when it is found it can be reconnected using isolation to make sure the cable doesn't break again.

The Iron Temperature Controller is not working

In this condition the iron does not want to heat even though the electric current has been distributed which is indicated by the indicator light on the burning iron unit. If this happens then most likely the problem is that the iron temperature control device is not functioning properly.

Currently all types of electric irons will automatically be equipped with a temperature control device so that it is easy to adjust the iron temperature according to your needs and can also work automatically.

In other words, if the iron is too hot, the bimetallic plate will automatically return to its original position so that the temperature drops as well as vice versa when the temperature automatically drops back the bimetal plate will curve and the temperature slowly rises.

The problem that often occurs in this plate is when the system is disrupted which is usually due to a buildup of dust on the surface of the plate so that the plate gets stuck and the iron does not want to heat.

Solution for Iron Temperature Control is not Working:

The solution is very easy, just by opening the iron component until you see a bimetal plate whose position is below the iron handle. Then start cleaning the dust that usually clots on the surface of the plate. After clean, replace the iron component and iron can be reused.

The Ironing Heating Plate Is Wear

When the iron is not hot due to the heating plate usually the iron is old. The heating plate serves to deliver heat but due to old age and continuous use can also cause wear plates to wear out.

Solution for Ironing Heating Plate Has Been Wear:

The solution is that the worn heating plate cannot be repaired but must be replaced. It is not difficult to place heating plates in shops that sell electrical appliances, but it must be ensured that the size of the plates is exactly the same if you want to replace them.

It turns out that the way to fix an iron that is not hot is not too difficult and can be done by anyone even by those who have no experience with electronic units because the way the electric iron works is quite easy so the components are easy to understand.