This is what it means Code Error Washing machine Panasonic And how to solve it

The crash / error code that appears on the Panasonic washer display screen unexpectedly.

Knowing any code errors that appear will be able to determine the cause, maybe the code appears not because there is damage to the washing machine but because of misuse or use.

Here is the error code that appears on the display screen Panasonic brand washing machine as a guide to overcome them.

Code U11 Panasonic

Washing machine can not dispose of laundry water, check on the filter the possibility of blockage in the form of coin money, pin, brooch or soap crust soap.
Check on the drain hose whether it is blocked or bent.
Check the motor cable pumpa drain or pumpa drain motor.
Check the sensor / switch.


Read Also:
7 Problems and How to Repair a Broken Washing Machine

Code U12 Panasonic

Make sure the door is closed and true.
Check the door switches and cables.

Code U13 Panasonic

The laundry is in an unbalanced state.
Check the laundry, make sure not wrapped or clot.
Continue check van belt / setreng along with the motor.

Code U14 Panasonic

The washing machine is too old / slow to fill the tube water, the time it takes to fill the water for more than 20 minutes.
Check the faucet and the inlet water filter.
Selenoid water inled is problematic.

Code U18 Panasonic

Pumpa air flue / drain problematic.
Check drain filter.
Check the electrical path of the pumpa exhaust motor if the error continues.

Read also: Error Code Washing Machine (All Brands)

Code H01 Panasonic

Pressure sensors switch undetected.
Switch sensor switch.
If the error persists replace the PCB panel.

Code H04 Panasonic

Problematic relay on electronic panel.
Check the cable with pcb.

Code H05 Panasonic

Data is not stored on the electronic control panel.
Replace the electric PCB.

Code H07 Panasonic

Tacho motor path problem, check tacho motor.
Error continues, replace PCB electrically.

Code H09 Panasonic

Check the electronic controller, if continue to replace PCB panel.

Code H17 Panasonic

Check the temperature sensor, check the cable and replace the temperature sensor heater.

Code H18 Panasonic

Abnormal motor fuse sensor, check on thermal motor fuse.

Code H21 Panasonic

Water level sensors increase from normal.
Check the water valve, clean the filter and the valve, the possibility of the valve can not close tightly.
Replace the water valve inlet when continuing.

Code H23 Panasonic

Abnormal Relay Heater
Replace PCB when continuing.

Code H25 Panasonic

The main driving force is problematic, check.
Replace the motor when it continues.

Code H27 Panasonic

The door is not locked properly, check.
Check the door lock cable.

Code H29 Panasonic

Fan cooling walked slowly.
Check the cooling fan.

Code H41 Panasonic

Spoin data is not obtained from 3D sensors.
Check the 3D sensor cable.

Code H43 Panasonic

Check for leakage source from the bottom of the washer, sil or leaky rubber hose.
The hose is less high.

Code H46 Panasonic

Abnormal signal from leakage.
Check the sensor cable.
Change sensor.

Code H51 Panasonic

Motor is detected heavy load.
Check the main motor and tube.
Check as / laker / bering motor and tube.

Code H52 Panasonic

High input voltage.
Check the electricity, maybe abnormal induction.

Code H53 Panasonic

Low input voltage.
Check the power supply.

Code H55 Panasonic

Abnormal when detected, while the motor rotates.
Replace the main motor drive.

Similarly code error / damage that appears on the display panel display Panasonic washing machine, may be useful for you.