Error Code Washing Machine (All Brands)

Code Damage / Warning Guide On Use Washing Machine

The importance of code (code) error on the display screen.
The occurrence of the error code occurs when the washing machine is in a state of disrepair or due to misuse and usage.

This code is very important to know what error code that occurs in the washing machine, so that it can quickly be normalized again (SERVICE)

Basically every damage code for the Washing Machine is almost the same for the error code, Like Code Error dE (Door Error) appears when there is damage to the door / door switch has not been closed properly.

Read also: 7 Problems and How to Repair a Broken Washing Machine

Here I will tell code-code error on all brands of washing machine.

• CODE ERROR SAMSUNG WASHING MACHINE
• CODE ERROR WASHING MACHINE LG
• CODE ERROR SHARP WASH MACHINERY
• CODE ERROR MACHINE WASHING ELECTROLUX
• CODE ERROR LUX WASH MACHINERY
• CODE ERROR MACHINE WASHING PANASONIC
• CODE ERROR WASHING MACHINE TOSHIBA
• CODE ERROR MACHINE WASHING ROUX LUX
• CODE ERROR SANYO WASHING MACHINERY
• CODE ERROR SANKEN WASH MACHINERY
• CODE ERROR MACHINE WASH DENPOO
• CODE ERROR POLYTRON WASH MACHINERY
• CODE ERROR MACHINE WASH MODENA

Read Also:
How to fix a washing machine dryer

Code Error Washing Machine Samsung

The samsung washer error code
The signal error code of the operating unit appears on the samsung washing machine

DE | Door Error
The door is not closed yet, make sure to close the door properly.

EU | Unbalance Error
The emergence of EU error codes when the washer is in an unbalanced state or tilted or clot (STOP USE) tidy the clotted laundry.

4E | Water Supplay Error
Ensure large pressurized water (50-800kpa) and open faucet.
Check the water filter, make sure it is always clean.

5E | Drain Error
Clean the drainage filter, check the hose do not get bent and clogged.

Sud | Foaming Detected
Excess foam due to soap too much, it is recommended to use liquid soap.
Leave the foam, and the engine is working normally again.

Uc | Power Error
Voltage is unstable, make sure the electricity is stable at 220 volts.
The washing machine secures the device from damage, back to work when the power is normal.

LE / LE1 | Water Leakage Error
The filter cover is disengaged or water leakage of tube, hose, so water decreases by itself.

OE / OF | Overflow Error
Continuous water supply detected water level can not detect water level.
Motor drain not working / damaged, could be popped OE / OF error code.

Code Eror Washing Machine LG Brand

LG washer error code

Unit error codes operate appearing on the display panel due to the following;

IE | Inlet Error
Make sure the water pressure is great. The water supply is slow due to small water pressure or dirty filter.

OE | Outside Error
The drain pump did not work perfectly.

EU | Unbalance
The state of the wash machine / does not stand upright, can also be due to clothing and cloth wrapped around.

dE | door Error
The door is not closed properly.

FE | Flooding Error
Excessive water supplay, too fast due to high water pressure or water can not stop water inlet problems

PE | P / Error switch
Sensor ball presure switch

RE / Relay Error
The relay on the PCB is not working properly.

E3 | Wash Error
The laundry load is too heavy, reduce and repeat the wash.

CHE | Conection Cable Heater Error
Cable sheater connectors loose or broken. (STOP USE)

SE | Sensor Motor Error
Motor sensor error / end / fuse break. (STOP USE)

Code Error Washing Machines Sharp Brands

Damage codes of washing machine shap appear on the display panel display in case of damage / error in use, the following codes are probably almost the same as other brands.

E1 | Inlet Error
The emergence of E1 damage code from water supplay is not smooth, because dirty in filter or water pressure less strong.

E2 | Door Error
The door is in an incorrect / damaged state.

E3 | Drain Error
Water pump / water pump problem.

E4 | Unbalance Error
Washing Machine in an unbalanced state, does not stand strong and shake, cloth clot.

LE / E9 | Pressure Error
Sensor ball pressure switch

C2 | Power Failure
Power supplay problem.

Code Error Machine Washing (Washing Machine) Brand Electrolux

Electrolux washing machine damage code is the same as other washing machines, just different code that appears on the display panel display.

Below is the damage code on the electrolux washing machine.

E10 | Electrolux
Incoming water is problematic, check the filter or water pressure decreases (not fast).

E20 | Electrolux
Problems with water discharge (water pump), hose bent / clogged soap crust soap.

E40 | Door Error Electrolux
The washing machine door is not fitting, the door switch is problematic.

Other Washing Machine Codes:

CL | Child Lock
Door safety for troubled child.

Preasure Error:
E2 | Polytron
E4 | Akari
E7 | Toshiba
F1 | Sanken

To know more clearly, can you know from the sequence of washing process, from the beginning of the garment until the clothing process is issued.

Characteristics other than damage code model type without display screen

Unable to operate
This is related to the door, if there is a display screen will appear code dE | door Error.


Water does not enter
Characteristics of water damage does not enter, because the pressure is reduced, the filter is dirty, and the motor does not rotate.

Wash Error failed
Washing machine in general, when the water comes in and the water level has been met then the next process rotate the tube, but will fail to operate when the door problem (dE | door error). Damage fails to wash, can also be caused motor damage but not necessarily appear error.

The drain error failed
This sign of damage can be seen, the tube will be full of water and can not be thrown away.
Damage can occur due to dead ends or drain motor problems. When the type of washing machine there will display the display screen code OE, E3 or E20 

The drying process (Spin Error) failed
The drying process will fail to operate, if water can not be disposed of. In addition to damage to the motor, the cause can occur on the door of the problem.

Similarly the washing machine error code that often happens, hopefully can help you in the process of repair or as a science in terms of damage to the washing machine code.