How To Repair Samsung Top Loading Washing Machine, Water Damage Can Not Enter To Tube

What is the function of selenoid water inlet?
Selenoid water inlet serves as an electric faucet controlled by electricity from the washer control panel.

The water inlet works when it gets a 220 volt electric current and forms a magnetic field to attract the valve cover of the drains.

One of the problems with the washing machine, most of the damage occurring to the water inlet resulting from the imposition of a less rigid water supply caused by a filter of water filter is rarely cleaned or the source water pressure is weak, consequently the selenoid water inlet works longer and the selenoid magnet coil is damaged or burning.

To overcome the damage to selenoid water inled must be replaced with a new one.

From the experience I experienced after the replacement selenoid water inlet was still not able to work for water supply, whereas I test using 220 volt electricity directly, selenoid water inlet can work open the valve.

After I check on the water supply inlet water supply was not out when the washing machine in operation.

Using a heated knife, I try to open the back of the samsung top loading module panel module.

After I trace the electrical line selenoid water inlet on the module turns to an IC TRIAC ACS1086S that has been broken.

After I try to replace it and close the module that I open the cover and I plug all the wires and I try to operate ..... wah it turns the water can already flow into the washing machine tube 😃😃😃

So our experience in repairing damage to the washing machine samsung top loading water inlet section, hopefully can add your insight on the problems especially the washing machine.