How to Repair Refrigerator With See Signs Characteristic Damage

Repair Refrigerator Damage seen from the characteristics of Damage. Fixing damage to a cooling device is actually very easy, by looking at the characteristics or signs of damage to the refrigerant will facilitate the repair process.

In this occasion, I will discuss the characteristics / signs of damage to the refrigerant and its causes, for that as the main capital in repairing a refrigerant should we know how the cooling tool works.

How does a cooling tool work?

How cooling works

Refrigerator cooling system is a Freon gas pump commonly referred to as Compressor by pumping freon gas with high pressure and compressed in the condenser condenser chamber so that the gas freon in the form of gas undergoes condensation. Freon gas that undergoes condensation to the filter for the filtration process so that when entering into the capillary pipe that the diameter of the hole is very small no deadlock occurs.

After passing the next filter the liquid freon gas flowing through the capillary pipe to the pipe / evaporator room is still high pressure.

In the evaporator pipe, the liquid gas undergoes evaporation while taking heat energy (evaporation).

Furthermore, the gas freon in the form of gas returns to the compressor.

By knowing how the cooling tool works, then we can conclude that:
1. Compressor is a freon gas pump tool.
2. Freon gas is a gas that serves to take heat from the evap room.

So when the compressor is damaged / dead, freon gas leak or dead end, it will not be perfect cold.

Cause refrigerator 1 Door Refrigerator Do Not Cold

To know the damage to the refrigerator, especially refrigerator 1 (one) door you can see the characteristics of the damage as follows;

1. Look and listen to the compressor engine, whether the sound is normal and the klu is held there vibration feels stable continuously. If it is true but not cold and there is a hissing sound in the evaporator, the possibility of gas leaking.

2. Signs of damage to the compressor when the machine is hot, vibrating smooth but just for a moment and the sound of ticks, the sign of overload cut off the electric current. Damage like this is possible on PTC Relay or Compressor stuck.

3. If the compressor engine vibrates normally, while if the listening room evaporator no sound hiss, the possibility of gas freon dead end.

4. In the compressor machine when no sound, vibration or klu is held not hot, the possibility of damage to the electrical system such as thermostat, overload or because the cable break.

Cause Of 2-Door Refrigerator Do Not Cold.
To know the damage to the refrigerator, especially on the refrigerator 2 (two) doors you can see the characteristics of the damage as follows.

1. Look and listen to the compressor engine, whether the sound is normal and the klu is held there vibration feels stable continuously. If true but not cold and there is a hissing sound in the efaporator, the possibility of gas leaking.

2. When the compressor engine vibrates normally, while the listening room evaporator no hissing sound, the possibility of a freon gas line dead end.

3. Signs of damage to the Compressor machine when the hand was hot, vibrating smooth but just for a moment and a tick, the sign of overload. Damage like this is possible on PTC Relay or Compressor stuck.

4. When the blower fan on the refrigerator the top door is off, the compressor is off and the only lamp is on, you try to turn the timer defros when life compressor and blower fan evaporator is also alive, meaning the cause of the damage is in heater defrost or fuse heater.

5. In the refrigerator 2 (door) door of the freezer section freezing cold (normal) but the bottom door space is not cold, the damage can happen because;

#. Place the open air conduit cover freezer to the bottom room damaged or covered in ice.
#. The drain to the rear end of the dead end, the previous possibility of water often flowed down the doorway.

6. In cold freezer room is not frozen, chiller is not cold, when checked all normal. Damage can occur on the door switch for the blower fan damaged / blower fan blower broken.

7. The last characteristic that often happens in refrigerator 2 (door) where cold freezer room is not frozen and next to the wall in many ice flower, when opened cover to evaporator there is accumulation of flower, bia so damage to thermo / bimetal defros. Damage like this can also be caused by other damage such as timer defrost, heater, fuse or because of the water flue and heater, so heater can not heat the ice flower in the evaporator when the defrost process that occurs every about 7 hours.

Such are the features of damage to the 2-door refrigerator that might help you in detecting damage to the refrigerator.