Chunghop K 1028E Universal Remote AC setting first time

AC universal remote for damaged or lost AC remote replacement

A Chunghop K 1028E Universal Remote AC product can be used for remote AC at home.

Maybe someone needs a replacement or spare AC remote. When the AC remote is damaged, either because of age it can be replaced with a universal remote like the Chunghop K 1028E

Or there is also a need for a spare AC remote at home.

For example, on the bed there is still the original AC remote, but want to have one spare remote. You can use the Chunghop K 1028E remote as a backup remote.

The price of the Universal Chunghop K 1028E AC remote is sold for around Rp. 20,000/ $ 1.5

Unlike the original remote, which immediately works to turn on and turn off the AC at home. Chunghop K 1028E Universal Remote AC needs to be set before use.

Because it is necessary to know the type of AC used by setting the new remote AC.

How to set up remote Chunghop K 1028E AC. Because the manual is written in English, plus the information provided is quite simple.

Setting the Chunghop K 1028E Universal Remote AC is very easy

Setting Reset Chunghop K 1028E Universal Remote AC

Suppose you want to do a remote reset. Simply press the SET button and the FAN mark (second button lower right)

Chunghop K 1028E AC Remote Setting to match to AC.

You can directly use the setting directly to your AC type.

1. Look at the AC brand and find the setting number of each brand.

For example Chonghang uses the numbers 059 to 079 and 934 and 947.

Or the Sharp AC brand using the numbers 720 to 739.


2. Then press the SET button for more than 3 seconds, until the lower right indicator screen appears - - - (description 1)

This means that the number is still blank and it is necessary to enter the brand and type of the AC number used

For example, your air conditioner is a Sharp brand. The number used is 720 to 739 for Chunghop K 1028E

3. Press the up arrow, then the display will display the number 001 and continue to rise to a higher number.

4. Until it approaches 720, slow down the number search on the remote. Don't forget to point the remote at the AC sensor (description 2)

5. In the 720th digit, listen to see if your AC unit makes a Beep sound.

If it doesn't go up again to 721 and so on.

In the test here, the Sharp AC was tried using the number 737. When the number reached 737, the AC blower unit sounded which meant the remote could be connected.

6. Then try to press the ON button, if the AC is on, it means that the Universal Remote AC setting Chunghop K 1028E is correct.

7. Then press OK to save the AC number that you have set (description 3).

8. Do a test whether all the settings are going well. If the number turns out to be wrong, write down the wrong number then press SET. Then skip the number above the previous number. Because it is possible that the two code numbers of the remote can work, but only one is fully functional.

 

Below is a manual listing of the AC numbers for the Universal Remote Chunghop K 1028E