ALL ELECTROLUX WASHING MACHINE ERROR CODE

Some electrolux washing machine error codes and the order of their solutions:

1.Error E10-19 (Problems related to water pressure)

Solution:

• Check the water level hose for possible loose / loose / leaking, clean the inside of the hose, blow the hose so that the dirt inside comes out.
• Check the solenoid, whether it is clogged or not, immediately give 220VAC voltage if it works and the valve opens it means normal, check the cable up to the mainboard module.
• Check the water running or not
• Check the Water Level, Check the Cables up to the mainboard module, change the water level.
• Check the mainboard module.

2.Error E20-29, EF1-EF2 (Problems related to system drain)

Solution:

Check the drain and drain hose.

For Top Loading check the drain motor and drain valve which are black. The drain motor can be checked with a 220VAC voltage, first remove the cable connector from the module. Check the cable leading to the mainboard module.

For Front Loading, open the cover on the front-bottom of the washing machine, open the cover which is usually in the form of a rotating circle to the left (counterclockwise), check whether there is any dirt or coins clogging or not. Check the pump and valve opening motor. The height of the hose from the bottom of the washing machine ranges from 60-90 cm. Too much soap foam will also cause an error when entering the water level hose because the ic program will read that water has not been wasted for a long time. Check the cable leading to the mainboard module.

Check the mainboard module.

3.Error E30-39 (The problem is related to the length of time to discharge water)

Solution:

Still related to the error E20-E29, water is not wasted and / or there is soap foam clogging the water level hose. Turn off the washing machine and restart the washing process without clothes and without soap after running for a few minutes, press the start / pause button then press the off button. Turn on the washing machine and do the drain process. The easiest way is to just blow the water level hose.

Check the mainboard module.

4.Error E40-49 (Error related to door switch)5. Error E50-79 and E90-99 (Problems related to the mainbord module)

Solution:

• Check the cables from the door switch to the mainboard module
• Replace the door switch
• Repair the door switch

The price of the switches varies which is obviously expensive for us. Can be fixed even though the result is not 100%. What is often damaged is the circular shape PTC is used to heat the bimetallic so that the contactor will connect and to lock the door (child lock). The substitute (cannibal) uses PTC television which is usually used for degausing the price of only around 5,000 (five thousand). Because the shape is flatter, it must be propped up with a metal plate.

Solution:

Check the mainboard module for possible firmware / program errors.

6.Error E80-89 (Problems related to program commands)

Solution:

• Turn off the washing machine, turn it on again
• Check the switch button and clear the path

7.Error E00, EH1-EH2-EH3-EB1-EB2-EB3 (Electrical related problems)

Solution:

Make sure the power plug is installed properly, put the body ground to the ground

8. Error Eb0 (Problems related to Power Supply)9. Error EFO or EF3

Solution:

Disassemble the Mainboard Module, check the power supply, voltage is abnormal or too low. Ground body attach to the ground.

Solution:

• Too much soap foam, something clogs the water lever hose during the washing process
• There is a cloth stuck in the door or caught in the drum

10. Error EF5

Solution:

• Drum unbalanced
• Over capacity

That's enough, hopefully this will be useful and ask for correction if there are things that are wrong. Great Jobs.