A collection of error codes on the Canon MP287 printer

For those who use the Canon MP 287 printer, you need to know what errors occur on your printer.
Well, here is a collection of error codes and their explanations:

COLLECTION OF ERROR CODES ON THE PRINTER CANON MP 287

1. PRINTER CANON MP 287 Error code E02

The cause of this code is "Printer is out of paper" which indicates that the printer problem is running out of paper and it could also be due to the incorrect paper position.
How to fix it:
- refill the paper when the paper runs out
- corrects the paper position when the paper position is not correct.

2. PRINTER CANON MP 287 Error code E03

Cause This code is "paper jammed" or the paper in the printer has a jam
How to fix it :
-check if there is anything blocking or blocking the exit of the paper
-Realod the paper properly
-check the paper roller for proper functioning

3. PRINTER CANON MP 287 Error code E04 and E05

The reason for this code is "The Fine Cartidge cannot be recognized" or the cartridge is not detected
Usually the cartridge is not installed properly or one of the cartridges is damaged
How to fix it :
-Remove the cartridge -Clean -Then plug it in again
- replace the cartridge
- make sure it sounds a click when installing it

4. PRINTER CANON MP 287 Error code E07

The reason for this code is that the amount of printing / printing ink on the cartridge exceeds the limit set by the factory
Or it could be called full printing
How to fix it :
-reset the printer

5. PRINTER CANON MP 287 Error code E08

The cause of this code is "Ink absorber is almost full" or the ink absorber is almost full
How to fix it :
-Press Black or color button to continue printing

6. PRINTER CANON MP 287 Error code E13

The cause of this code is "The Remaning Ink Level Cannot be detected" indicating that the ink is not detected or run out
How to fix it :
-Press the STOP / RESET button for 5/10 seconds until the indicator display shows the number 1

7. PRINTER CANON MP 287 Error code E14

The cause of this code is "The Fine Cartidge cannot be recognized" or a cartridge is not detected.
Usually because the cartridge is overflowing or it's time to replace the cartridge
How to fix it :
- replace the cartridge
-if the cartridge is overflowing, just clean it

8. PRINTER CANON MP 287 Error code E15

The cause of this code is "The Fine Cartidge cannot be recognized" or a cartridge is not detected.
Usually the cartridge is not installed properly
How to fix it:
-Remove the cartridge, then plug it in again correctly
 

9. PRINTER CANON MP 287 Error code E16

The cause of this code is The Ink has Run Out
How to fix it :
-Press the STOP / RESET button for a long time for about 5-15 seconds until the LCD panel rotates, then release
 

10.E30

The cause of this code is a problem with the document to be scanned, usually the document is too small
How to fix it :
-check and make sure the document position is correct
 

11.E31

The cause of this code is "The printer is not connected with computer" or the printer is not connected to the computer
How to fix it :
-check and make sure the printer cable is completely connected to the computer
-Replace if the cable is damaged
 

12.E50

The cause of this code is that there is a problem in the scanning section, the document is not detected
The fix is:
-Insert paper of the appropriate size
-Position the paper correctly
-Make sure the scanner plate glass is in clean condition
-check the print head is in good condition

Canon MP 287 printer Error Code With "P" Indicator

1.P02

Carriage error, there is a problem in the Carriage
How to fix it :
-Clean the encoder
-check printer roll
-Take it out if there are objects that interfere

2.P03

Line feed error
How to fix it :
-check sensor for disc timing
-loud the mainboard

3.P05

Faulty ASF sensor
How to fix it :
-Replacing a part such as ASF unit, board, and printer motor

4.P06

The printer temperature is too hot
How to fix it :
-Clean the machine or replace the board

5.P07

Ink absorber full
How to fix it :
-reset the printer via the maintenance menu in the computer software

6.P08

Temper rudra is too hot
How to fix it :
- replace the color cartridge

7.P09

EEPROM Error
How to fix it :
- change board

8.P10

There is a problem with one of the printer components due to an electrical short circuit
How to fix it:
-Turn off the printer totally for a few minutes, then turn it back on
-if you still have to replace one of the components that cause a problem

9.P15

USB over current
How to overcome :
- replace the cable or replace the board

10.P20

Other hardware error or damage to the hardware
How to fix it:
-Replacing the mainboard or printer hardware

11.P22

Scanner not working
How to fix it :
- replace the scanner or board