8 Error Codes On Canon IP2770 Printer And How To Fix It

One printer that is quite good, the print results are quite clear and the price is certainly friendly is the Canon IP2770 printer. It is undeniable that the Canon IP2770 printer is a favorite for SMEs, agencies / offices, students and ordinary homes. 

Behind the advantages possessed by this Canon IP2770 printer is certainly not free from the problems that occur. One of the problems that often occur with the canon ip2770 printer is the number of flashes that are orange and green.

The number of blinks that occur on the canon ip2770 printer indicates different damage to the printer. Therefore we will discuss the error code / blink on a canon ip2770 printer and how to fix it.

1. Blink 3X orange and 1X green

Cause: there is dirt near the roller, or it could be due to a broken mechanic.

Solution: if the canon ip2770 printer is still guaranteed, you should take it to a service center, if it is not guaranteed then disassemble the printer and check if there are foreign objects clogging, repair or replace mechanics.

2. Blink 4X orange and 1X green

Cause: the ink pad is full (Waste Ink Pad Full)

Solution: reset the printer with resetter software

3. Blink 5X orange and 1X green

Cause: there is a defective black or color cartridge

Solution: check the cartridge and clean the chip with a tissue, there is the possibility of getting ink on it which causes it not to connect. If you still can't, then you should buy a new cartridge to replace the old one.

4. Blink 7X orange and 1X green

Cause: the color cartridge is damaged / dead

Solution: replace the color cartridge with a new one

5. Alternate blinking 7X color of person and green

Cause: Waste Ink Pad Full, Ink Absorber Full

Solution: for printers that are not infused / infused that are not given disposal, clean the ink absorbent foam on the bottom of the printer, then reset the printer using a software resetter.

6. Blink 8X orange and 1X green

Cause: Ink Tank Full

Solution: reset the printer with resetter software

7. Blink 13X / 16X orange and 1X green

Cause: the cartridge is not installed properly, a cartridge image will appear as if it was released up on the monitor screen when printing a document.

Solution: press and hold the resume button for less than 10 seconds

8. Blink 14X / 15X orange and 1X green

Cause: the black cartridge is damaged, the cartridge chip is dead

Solution: first clean the cartridge chip with a wet tissue then dry it with a dry tissue. If this method doesn't work then replace the black cartridge with a new one.

This is information about some error codes / blinks on a canon ip2770 printer and how to fix them. Hopefully the information above can be useful for all Manxi friends.